Command Line Reference Guide

bpdu interface
{in | out}
(OPTIONAL) Enter the keyword bpdu to debug the bridge
protocol data units.
(OPTIONAL) Enter the keyword interface along with the
type slot/port of the interface you want displayed. Type slot/
port options are the following:
• For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
Optionally, enter an in or out parameter with the optional
interface:
• For Receive, enter in.
• For Transmit, enter out.
events (OPTIONAL) Enter the keyword events to debug RSTP
events.
Command
Modes
EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#debug spanning-tree rstp bpdu gigabitethernet 2/0 ?
in Receive (in)
out Transmit (out)
description
Enter a description of the rapid spanning tree.
Syntax
description {description}
To remove the description, use the no description {description}
command.
Parameters
description Enter a description to identify the rapid spanning tree (80
characters maximum).
Defaults none
Rapid Spanning Tree Protocol (RSTP)
1143