Command Line Reference Guide

show sflow stack-unit
Display the sFlow information on a stack unit.
Syntax
show sflow stack-unit {unit number}
Parameters
unit number (OPTIONAL) Enter a unit number to view information on the
stack unit in that slot. The range is from 0 to 5.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The dropEvent counter (sFlow samples dropped due to sub-sampling) shown in
the following example below always displays a value of zero.
Example
Dell#show sflow stack-unit 1
Stack-Unit 1
Samples rcvd from h/w :0
Total UDP packets exported :0
UDP packets dropped :0
Dell#
sFlow
1215