Command Line Reference Guide

default gateway
Set the default gateway IP address.
Syntax
default-gateway <ip-address>
Command
Modes
uBoot
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
enable
Change the access privilege level.
Syntax
enable [user | admin]
Command
Modes
uBoot
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
help
Display the help menu.
Syntax
help
Command
Modes
uBoot
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
BOOT_USER # help
***** Dell Force10 Boot Interface Help Information *****
Current access level: USER LEVEL
Use "syntax help" for more information on syntax.
Available command list (22 commands total):
boot change [primary|secondary|default]
change operating system boot parameters
boot selection [a|b]
change the rom bootstrap bootflash partition
boot show net config retries
show number of retries for network boot config failure
boot write net config retries <int>
write number of retries for network boot config failure
boot zero [primary|secondary|default]
zero operating system boot parameters
default-gateway <ip-address>
1306
u-Boot