Command Line Reference Guide

Virtual Router Redundancy Protocol

(VRRP)

Virtual router redundancy protocol (VRRP) is supported by the Dell Networking Operating System (OS) for

IPv4 and IPv6.

The following commands apply to both VRRP IPv4 and IPv6:

• advertise-interval

• description

• disable

• hold-time

• preempt

• priority

• show config

• track

• virtual-address

VRRP Ipv6 are in the VRRP for IPv6 Commands section.

advertise-interval

Set the time interval between VRRP advertisements.

Syntax

advertise-interval {seconds | centisecs centisecs}

To return to the default settings, use the no advertise-interval command.

Parameters

seconds Enter a number of seconds. The range is from 1 to 255. The

default is 1 second.

centisecs

Enter the keyword centisecs followed by the number of

centisecs in multiple of 25 centisecs. The range is 25 to 4075

centisecs in multiples of 25 centisecs.

Defaults 1 second or 100 centisecs

Command

Modes

INTERFACE-VRRP

Command

History

Version 9.5(0.0) Introduced the support for centisecs on the MXL 10/40GbE

Switch .

Virtual Router Redundancy Protocol (VRRP)

1345