Command Line Reference Guide

Field Description
Admin mode ETS mode: on or off. When on, the scheduling and
bandwidth allocation configured in an ETS output policy or
received in a DCBX TLV from a peer can take effect on an
interface.
Admin Parameters ETS configuration on local port, including priority groups,
assigned dot1p priorities, and bandwidth allocation.
Remote
Parameters
ETS configuration on remote peer port, including admin
mode (enabled if a valid TLV was received or disabled),
priority groups, assigned dot1p priorities, and bandwidth
allocation. If ETS admin mode is enabled on the remote port
for DCBX exchange, the Willing bit received in ETS TLVs
from the remote peer is included.
Local Parameters ETS configuration on local port, including admin mode
(enabled when a valid TLV is received from a peer), priority
groups, assigned dot1p priorities, and bandwidth allocation.
Operational status
(local port)
Port state for current operational ETS configuration:
• Init: Local ETS configuration parameters were
exchanged with the peer.
• Recommend: Remote ETS configuration parameters were
received from the peer.
• Internally propagated: ETS configuration
parameters were received from the configuration
source.
ETS DCBX Oper
status
Operational status of the ETS configuration on the local
port: match or mismatch.
State Machine
Type
Type of state machine used for DCBX exchanges of ETS
parameters: Feature — for legacy DCBX versions;
Asymmetric — for an IEEE version.
Conf TLV Tx
Status
Status of ETS Configuration TLV advertisements: enabled or
disabled.
ETS TLV Statistic:
Input Conf TLV
pkts
Number of ETS Configuration TLVs received.
ETS TLV Statistic:
Output Conf TLV
pkts
Number of ETS Configuration TLVs transmitted.
ETS TLV Statistic:
Error Conf TLV
pkts
Number of ETS Error Configuration TLVs received.
Example
(Summary)
Dell(conf)# show interfaces te 0/0 ets summary
Interface TenGigabitEthernet 0/0
PMUX Mode of the MXL 10/40GbE Switch I/O Module
1447