Command Line Reference Guide

Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
neighbor add-path — specifies that this neighbor/peer group can send/receive
multiple path advertisements.
bgp always-compare-med
Allows you to enable comparison of the MULTI_EXIT_DISC (MED) attributes in the paths from different
external ASs.
Syntax
bgp always-compare-med
To disable comparison of MED, enter no bgp always-compare-med.
Defaults Disabled (that is, the software only compares MEDs from neighbors within the
same AS).
Command
Modes
ROUTER BGP
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Any update without a MED attribute is the least preferred route.
If you enable this command, use the clear ip bgp * command to recompute
the best path.
bgp asnotation
Allows you to implement a method for AS number representation in the command line interface (CLI).
Syntax
bgp asnotation [asplain | asdot+ | asdot]
To disable a dot or dot+ representation and return to ASPLAIN, enter the no bgp
asnotation command.
Defaults asplain
Command
Modes
ROUTER BGP
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Border Gateway Protocol IPv4 (BGPv4)
313