Command Line Reference Guide

Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
To view the total number of COMMUNITY attributes found, use the show ip bgp
summary command. The text line above the route table states the number of
COMMUNITY attributes found.
The show ip bgp community command without any parameters lists BGP
routes with at least one BGP community attribute and the output is the same as for
the show ip bgp command output.
show ip bgp filter-list
View the routes that match the filter lists.
Syntax
show ip bgp [ipv4 unicast] filter-list as-path-name
Parameters
ipv4 unicast (OPTIONAL) Enter the keywords ipv4 unicast to view
information only related to ipv4 unicast routes.
as-path-name Enter an AS-PATH access list name. The range is 140
characters.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The following describes the show ip bgp filter-list hello command
shown in the following example.
Field Description
Path source
codes
Lists the path sources shown to the right of the last AS
number in the Path column:
• i = internal route entry
• a = aggregate route entry
• c = external confederation route entry
• n = network route entry
• r = redistributed route entry
372
Border Gateway Protocol IPv4 (BGPv4)