Command Line Reference Guide

Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The system reboots when the off-line diagnostics complete. This reboot is an
automatic process. A warning message appears when the offline stack-unit
command is implemented.
Warning - Diagnostic execution will cause stack-unit to reboot
after completion of diags.
Proceed with Offline-Diags [confirm yes/no]:y
online stack-unit
Place a stack unit in the online state.
Syntax
online stack-unit number
Parameters
number Enter the stack-unit number. The range is from 0 to 5.
Defaults none
Command
Modes
EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Buffer Tuning Commands
The following sections detail the buffer tuning commands.
WARNING: Altering the buffer allocations is a sensitive operation. Do not use any buffer tuning
commands without first contacting the Dell Networking Technical Assistance Center (TAC).
buffer (Buffer Profile)
Allocate an amount of dedicated buffer space, dynamic buffer space, or packet pointers to queues 0 to 3.
Syntax
buffer [dedicated | dynamic | packets-pointers] queue0 number
queue1 number queue2 number queue3 number
Parameters
dedicated Enter the keyword dedicated to configure the amount of
dedicated buffer space per queue.
466
Debugging and Diagnostics