Command Line Reference Guide

• For a Ten-Gigabit Ethernet interface, enter the keyword
tengigabitethernet.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE.
slot/port Enter the slot and port number of the interface.
lease time Enter the keyword lease then the amount of time the IP
address are leased. The range is from 1 to 4294967295.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
show ip dhcp snooping — displays the contents of the DHCP binding table.
ip dhcp snooping database renew
Renew the binding table.
Syntax
ip dhcp snooping database renew
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
ip dhcp snooping trust
Configure an interface as trusted.
Syntax
[no] ip dhcp snooping trust
Defaults Untrusted
Command
Modes
INTERFACE
Dynamic Host Configuration Protocol (DHCP)
499