Command Line Reference Guide

===================================
!-------output truncated -------------------------!
Related
Commands
interface — configures a physical interface on the switch.
show ip interface — displays Layer 3 information about the interfaces.
show interfaces — displays information on a specific physical interface or virtual
interface.
show inventory — displays the switch type, components (including media), the Dell
Networking OS version including hardware identification numbers, and configured
protocols.
show range
Display all interfaces configured using the interface range command.
Syntax
show range
Command
Modes
INTERFACE RANGE (config-if-range)
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell(conf-if-range-te-0/16)#show range
interface tengigabitethernet 0/16
Dell(conf-if-range-te-0/16)#
Related
Commands
interface — configures a physical interface on the switch.
show ip interface — displays Layer 3 information about the interfaces.
show interfaces — displays information on a specific physical interface or virtual
interface.
shutdown
Disable an interface.
Syntax
shutdown
To activate an interface, use the no shutdown command.
Defaults The interface is disabled.
596
Interfaces