Command Line Reference Guide

Parameters
ip-address (OPTIONAL) Specify a name of a device or the IP address of
the device to view more detailed information about the
route.
mask (OPTIONAL) Specify the network mask of the route. Use this
parameter with the IP address parameter.
longer-prefixes (OPTIONAL) Enter the keywords longer-prefixes to view
all routes with a common prefix.
list prefix-list (OPTIONAL) Enter the keyword list and the name of a
configured prefix list. For more information, refer to the
show ip route list command.
process-id (OPTIONAL) Specify that only OSPF routes with a certain
process ID must be displayed.
connected (OPTIONAL) Enter the keyword connected to view only the
directly connected routes.
all (OPTIONAL) Enter the keyword all to view both active and
non-active routes.
static (OPTIONAL) Enter the keyword static to view only routes
the ip route command configures.
summary (OPTIONAL) Enter the keyword summary. For more
information, refer to the
show ip route summary command.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The following describes the show ip route all command in the following
example.
Field Description
(undefined) Identifies the type of route:
• C = connected
• S = static
• R = RIP
• B = BGP
• IN = internal BGP
• EX = external BGP
• LO = Locally Originated
• O = OSPF
• IA = OSPF inter area
• N1 = OSPF NSSA external type 1
IPv4 Routing
647