Command Line Reference Guide

NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
NOTE: If a route has a mask greater than 64, no output is displayed and no
output is displayed for show ipv6 cam stack-unit unit-number port-
set {0-1} ipv6-address, but an equivalent /64 entry would be listed in
the
show ipv6 cam stack-unit unit-number port-set {0-1}
output. Similarly, if there is more than one ECMP object with a destination
route that has a mask greater than 64, if the first 64 bits in the destination
routes of the ECMP objects are the same, only one route is installed in CAM
even though multiple ECMP path entries exist.
show ipv6 control-plane icmp
Displays the status of the icmp control-plane setting for the error eate limit setting.
Syntax
show ipv6 control-plane icmp
Default 100
Command
Modes
EXEC
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
ipv6 flowlabel-zero — Configure IPv6 address auto-configuration for the
management interface.
show ipv6 fib stack-unit
View all FIB entries.
Syntax
show ipv6 fib stack-unit unit-number [summary | ipv6-address]
Parameters
slot-number Enter the number of the stack unit. The range is from 0 to 11.
684
IPv6 Basics