Command Line Reference Guide

out (OPTIONAL) Enter the keyword out to activate only
outbound policies.
Command
Modes
EXEC Privilege
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
clear ip bgp as-number
Reset BGP sessions. The soft parameter (BGP Soft Reconfiguration) clears the policies without resetting
the TCP connection.
Syntax
clear ip bgp as-number [flap-statistics | ipv4 {multicast
{flap-statistics | soft {in | out}} | unicast {flap-statistics
| soft {in | out}} | ipv6 unicast {flap-statistics | soft {in |
out}| soft [in | out]
Parameters
as-number Enter an autonomous system (AS) number to reset neighbors
belonging to that AS. If used without a qualifier, the keyword
resets all neighbors belonging to that AS. The range is from 1
to 65535.
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to clear
all flap statistics belonging to that AS or a specified address
family within that AS.
ipv4 (OPTIONAL) Enter the keyword ipv4 to select options for
that address family.
ipv6 (OPTIONAL) Enter the keyword ipv6 to select options for
that address family.
unicast (OPTIONAL) Enter the keyword unicast to select the
unicast option within the selected address family.
multicast (OPTIONAL) Enter the keyword multicast to select the
multicast option within the selected address family. Multicast
is supported on IPv4 only.
soft (OPTIONAL) Enter the keyword soft to configure and
activate policies without resetting the BGP TCP session; that
is, BGP Soft Reconfiguration.
NOTE: If you enter clear ip bgp ipv6-address
soft, both inbound and outbound policies are reset.
in (OPTIONAL) Enter the keyword in to activate only inbound
policies.
IPv6 Border Gateway Protocol (IPv6 BGP)
709