Command Line Reference Guide

NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
peer-group
peer-group-
name
Enter the keywords peer-group then the name of the peer
group.
in (OPTIONAL) Enter the keyword in to view only information
on inbound BGP routes.
out (OPTIONAL) Enter the keyword out to view only information
on outbound BGP routes.
Command
Modes
EXEC Privilege
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Entering a no debug ip bgp command removes all configured debug
commands for BGP.
debug ip bgp ipv6 dampening
View information on dampened (non-active) IPv6 routes.
Syntax
debug ip bgp ipv6 unicast dampening [in | out]
To disable debugging, use the no debug ip bgp ipv6 unicast dampening
command.
Parameters
in (OPTIONAL) Enter the keyword in to view only inbound
dampened routes.
out (OPTIONAL) Enter the keyword out to view only outbound
dampened routes.
Command
Modes
EXEC Privilege
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Entering a no debug ip bgp command removes all configured debug
commands for BGP.
Related
Commands
show ip bgp ipv6 unicast dampened-paths — views BGP dampened routes.
IPv6 Border Gateway Protocol (IPv6 BGP)
715