Command Line Reference Guide

Usage
Information
By default, when you create a neighbor/peer group configuration in the Router
BGP context, it is enabled for the IPv6/Unicast AFI/SAFI. By using activate in the
new context, the neighbor/peer group is enabled for AFI/SAFI.
neighbor advertisement-interval
Set the advertisement interval between BGP neighbors or within a BGP peer group.
Syntax
neighbor {ipv6-address | peer-group-name} advertisement-
interval seconds
To return to the default value, use the no neighbor {ipv6-address | peer-
group-name
} advertisement-interval command.
Parameters
ipv6-address Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
peer-group-
name
Enter the name of the peer group to set the advertisement
interval for all routers in the peer group.
seconds Enter a number as the time interval, in seconds, between
BGP advertisements. The range is from 0 to 600 seconds.
The default is 5 seconds for internal BGP peers and 30
seconds for external BGP peers.
Defaults
• seconds = 5 seconds (internal peers)
• seconds = 30 seconds (external peers)
Command
Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
neighbor allowas-in
Set the number of times an AS number can occur in the AS path.
Syntax
neighbor {ip-address | peer-group-name} allowas-in number
To return to the default value, use the no neighbor {ip-address | peer-
group-name} allowas-in command.
722
IPv6 Border Gateway Protocol (IPv6 BGP)