Command Line Reference Guide

ManualsBrandsDell ManualsSoftwareForce10

731

732

733

734

735

736

737

738

739

740

Parameters

ipv6-address

prefix-length

Enter the IPv6 address in the x:x:x:x::x format then the prefix

length in the /x format. The range is from /0 to /128.

NOTE: The :: notation specifies successive hexadecimal

fields of zeros.

mask Enter the mask of the IP address in the slash prefix length

format (for example, /24). The mask appears in command

outputs in dotted decimal format (A.B.C.D).

route-map

map-name

(OPTIONAL) Enter the keywords route-map then the name

of an established route map.

If the route map is not configured, the default is deny (to

drop all routes).

Defaults Not configured.

Command

Modes

ROUTER BGPV6-ADDRESS FAMILY

Command

History

Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.

Usage

Information

The software resolves the network address configured by the network command

with the routes in the main routing table to ensure that the networks are reachable

using non-BGP routes and non-default routes.

Commands

redistribute — redistributes routes into BGP.

network backdoor

Specify this IGP route as the preferred route.

Syntax

network ipv6-address prefix-length backdoor

To remove a network, use the no network ipv6-address prefix-length

backdoor command.