Command Line Reference Guide

description
Add a description about the selected VLAN.
Syntax
description description
Parameters
description Enter a text string description to identify the VLAN (80
characters maximum).
Defaults none
Command
Modes
INTERFACE VLAN
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
show vlan — displays the VLAN configuration.
default vlan-id
Specify a VLAN as the Default VLAN.
Syntax
default vlan-id vlan-id
To remove the default VLAN status from a VLAN and VLAN 1 does not exist, use the
no default vlan-id vlan-id syntax.
Parameters
vlan-id Enter the VLAN ID number of the VLAN to become the new
Default VLAN. The range is from 1 to 4094. The default is 1.
Defaults The Default VLAN is VLAN 1.
Command
Modes
CONFIGURATION
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
To return VLAN 1 as the Default VLAN, use the (default-vlan-id 1) command.
The Default VLAN contains only untagged interfaces.
Related
Commands
interface vlan — configures a VLAN.
Layer 2
857