Command Line Reference Guide
show config
Display the current configuration of the selected VLAN.
Syntax
show config
Command
Modes
INTERFACE VLAN
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell(conf-if-vl-100)#show config
!
interface Vlan 1
description a
no ip address
mtu 2500
shutdown
Dell(conf-if-vl-100)#
show vlan
Display the current VLAN configurations on the switch.
Syntax
show vlan [brief | id vlan-id | name vlan-name]
Parameters
brief (OPTIONAL) Enter the keyword brief to display the
following information:
• VLAN ID
• VLAN name (left blank if none is configured)
• Spanning Tree Group ID
• MAC address aging time
• IP address
id vlan-id (OPTIONAL) Enter the keyword id then a number from 1 to
4094. Only information on the VLAN specified is displayed.
name vlan-
name
(OPTIONAL) Enter the keyword name then the name
configured for the VLAN. Only information on the VLAN
named is displayed.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Layer 2
859