Command Line Reference Guide

ManualsBrandsDell ManualsSoftwareForce10

871

872

873

874

875

876

877

878

879

880

show running-config lldp — displays the LLDP running configuration.

advertise med voice

To advertise a dedicated IP telephony handset or other appliances supporting interactive voice services,

configure the system.

Syntax

advertise med voice {vlan-id} | {priority-tagged number}

To return to the default, use the no advertise med voice {vlan-id} |

{priority-tagged

number} command.

Parameters

vlan-id Enter the VLAN ID. The range is from 1 to 4094.

priority-tagged

number

Enter the keywords priority-tagged then the Layer 2

priority. The range is from 0 to 7.

Defaults unconfigured.

Command

Modes

CONFIGURATION (conf-lldp)

Command

History

Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.

Commands

debug lldp interface — debugs LLDP.

show lldp neighbors — displays the LLDP neighbors.

show running-config lldp — displays the LLDP running configuration.

advertise med voice-signaling

To advertise when voice control packets use a separate network policy than voice data, configure the

system.

Syntax

advertise med voice-signaling {vlan-id} | {priority-tagged

number}

To return to the default, use the no advertise med voice-signaling

{vlan-id} | {priority-tagged number} command.