Manualshelf

Command Line Reference Guide

ManualsBrandsDell ManualsSoftwareForce10
881882883884885886887888889890
ip vlan-flooding
Enable unicast data traffic flooding on VLAN member ports.
Syntax
ip vlan-flooding
To disable, use the no ip vlan-flooding command.
Command
Modes
CONFIGURATION
Command
History
Version 9.3(0.0) Introduced on the MXL 10/40GbE Switch IO Module
platform.
Default Disabled
Usage
Information
By default this command is disabled. There might be some ARP table entries which
are resolved through ARP packets which had Ethernet MAC SA different from MAC
information inside the ARP packet. This unicast data traffic flooding occurs only for
those packets which use these ARP entries.
886
Microsoft Network Load Balancing