Command Line Reference Guide

Example
Dell#debug spanning-tree mstp bpdu tengigabitethernet 0/16 ?
in Receive (in)
out Transmit (out)
Dell#
description
Enter a description of the multiple spanning tree.
Syntax
description {description}
To remove the description, use the no description {description}
command.
Parameters
description Enter a description to identify the multiple spanning tree
(maximum 80 characters).
Defaults none
Command
Modes
SPANNING TREE (The prompt is “config-mstp”.)
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
protocol spanning-tree mstp — enters MULTIPLE SPANNING TREE mode on the
switch.
disable
Globally disable the multiple spanning tree protocol on the switch.
Syntax
disable
To enable MSTP, enter the no disable command.
Defaults disabled.
Command
Modes
MULTIPLE SPANNING TREE
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
protocol spanning-tree mstp — enters MULTIPLE SPANNING TREE mode.
Multiple Spanning Tree Protocol (MSTP)
899