Command Line Reference Guide

disable
Enable bridge protocol data units (BPDU) filter globally to filter transmission of BPDU on port-fast
enabled interfaces.
Syntax
edge-port bpdufilter default
To disable global bpdu filter default, use the no edge-port bpdufilter
default command.
Defaults disabled.
Command
Modes
MULTIPLE SPANNING TREE
Command
History
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
forward-delay
The amount of time the interface waits in the Blocking State and the Learning State before transitioning
to the Forwarding State.
Syntax
forward-delay seconds
To return to the default setting, use the no forward-delay command.
Parameters
seconds Enter the number of seconds the interface waits in the
Blocking State and the Learning State before transiting to the
Forwarding State. The range is from 4 to 30. The default is 15
seconds.
Defaults 15 seconds
Command
Modes
MULTIPLE SPANNING TREE
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
max-age — changes the wait time before MSTP refreshes protocol configuration
information.
hello-time — changes the time interval between bridge protocol data units
(BPDUs).
900
Multiple Spanning Tree Protocol (MSTP)