Command Line Reference Guide

ip ftp username
Assign a user name for outgoing FTP connection requests.
Syntax
ip ftp username username
Parameters
username Enter a text string as the user name up to 40 characters long.
Defaults No user name is configured.
Command
Modes
CONFIGURATION
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Configure a password with the ip ftp password command.
Related
Commands
ip ftp password — sets the password for FTP connections.
ip telnet server enable
Enable the Telnet server on the switch.
Syntax
ip telnet server enable
To disable the Telnet server, use the no ip telnet server enable command.
Defaults Enabled
Command
Modes
CONFIGURATION
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
ip ssh server — enables the secure shell (SSH) server on the system.
ip telnet source-interface
Set an interface’s IP address as the source address in outgoing packets for Telnet sessions.
Syntax
ip telnet source-interface interface
Parameters
interface Enter the following keywords and slot/port or number
information:
Control and Monitoring
93