Command Line Reference Guide

Usage
Information
You can configure a maximum of six digest keys on an interface. Of the available
six digest keys, the switches select the MD5 key that is common. The remaining
MD5 keys are unused.
To change to a different key on the interface, enable the new key while the old key
is still enabled. The system sends two packets: the first packet authenticated with
the old key and the second packet authenticated with the new key. This process
ensures that the neighbors learn the new key and communication is not disrupted
by keeping the old key enabled.
After the reply is received and the new key is authenticated, delete the old key. Dell
recommends keeping only one key per interface.
NOTE: The MD5 secret is stored as plain text in the configuration file with
service password encryption. Write down or otherwise record the key. You
cannot learn the key once it is configured. Use caution when changing the
key.
ip ospf mtu-ignore
Disable OSPF MTU mismatch detection upon receipt of database description (DBD) packets.
Syntax
ip ospf mtu-ignore
To return to the default, use the no ip ospf mtu-ignore command.
Defaults Enabled.
Command
Modes
INTERFACE
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
ip ospf network
Set the network type for the interface.
Syntax
ip ospf network {broadcast | point-to-point}
To return to the default, use the no ip ospf network command.
Parameters
broadcast Enter the keyword broadcast to designate the interface as
part of a broadcast network.
point-to-point Enter the keywords point-to-point to designate the
interface as part of a point-to-point network.
942
Open Shortest Path First (OSPFv2 and OSPFv3)