Command Line Reference Guide

• 1 = OSPF External type 1
• 2 = OSPF External type 2
route-map
map-name
(OPTIONAL) Enter the keywords route-map then the name
of the route map.
tag tag-value (OPTIONAL) Enter the keyword tag then a number. The
range is from 0 to 4294967295.
Defaults Not configured.
Command
Modes
ROUTER OSPF
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
To redistribute the default route (0.0.0.0/0), configure the default-information
originate command.
Related
Commands
default-information originate — generates a default route into the OSPF routing
domain.
redistribute bgp
Redistribute BGP routing information throughout the OSPF instance.
Syntax
redistribute bgp as number [metric metric-value] | [metric-type
type-value] | [tag tag-value]
To disable redistribution, use the no redistribute bgp as number [metric
metric-value] | [metric-type type-value] [tag tag-value]
command.
Parameters
as number Enter the autonomous system number. The range is from 1
to 65535.
metric metric-
value
(OPTIONAL) Enter the keyword metric then the metric-
value number. The range is from 0 to16777214.
metric-type
type-value
(OPTIONAL) Enter the keywords metric-type then one of
the following:
• 1 = for OSPF External type 1
• 2 = for OSPF External type 2
tag tag-value (OPTIONAL) Enter the keyword tag to set the tag for routes
redistributed into OSPF. The range is from 0 to 4294967295.
Defaults none
Open Shortest Path First (OSPFv2 and OSPFv3)
949