Configuration manual

Example of the show dot1p-queue mapping Command
Example of the show dcb Command
Example of the show qos dcb-input Command
Example of the show qos dcb-output Command
Example of the show qos priority-groups Command
Example of the show interfaces pfc summary Command
Example of the show interface pfc statistics Command
Example of the show interface ets summary Command
Example of the show interface ets detail Command
Example of the show stack-unit all stack-ports all pfc details Command
Example of the show stack-unit all stack-ports all ets details Command
Example of the show interface DCBx detail Command
Dell(conf)# show dot1p-queue-mapping
Dot1p Priority: 0 1 2 3 4 5 6 7
Queue : 0 0 0 1 2 3 3 3
Dell# show dcb
stack-unit 0 port-set 0
DCB Status : Enabled
PFC Port Count : 56 (current), 56 (configured)
PFC Queue Count : 2 (current), 2 (configured)
Dell(conf)# show qos dcb-input
dcb-input pfc-profile
pfc link-delay 32
pfc priority 0-1
dcb-input pfc-profile1
no pfc mode on
pfc priority 6-7
Dell# show qos dcb-output
dcb-output ets
priority-group san qos-policy san
priority-group ipc qos-policy ipc
priority-group lan qos-policy lan
Dell#show qos priority-groups
priority-group ipc
priority-list 4
set-pgid 2
Dell# show interfaces tengigabitethernet 0/49 pfc summary
Interface TenGigabitEthernet 0/49
Admin mode is on
Admin is enabled
Remote is enabled, Priority list is 4
Remote Willing Status is enabled
Local is enabled
1014
FC Flex IO Modules