Configuration manual

correctly configured) or Incomplete (either the FC-MAP value, fabric ID,
or VLAN ID are not correctly configured).
Oper-State Operational status of the link to the fabric: up (link is up and
transmitting FC traffic), down (link is down and not transmitting FC
traffic), link-wait (link is up and waiting for FLOGI to complete on peer
FC port), or removed (port has been shut down).
Members MXL 10/40GbE Switch or M I/O Aggregator with the FC Flex IO module
Ethernet and FC ports, which are members of the dedicated FCoE
VLAN that carries storage traffic to the specified fabric.
show qos dcb-map Command Examples
Dell# show qos dcb-map dcbmap2
State :Complete
PfcMode:ON
--------------------
PG:0 TSA:ETS BW:50 PFC:OFF
Priorities:0 1 2 4 5 6 7
PG:1 TSA:ETS BW:50 PFC:ON
Priorities:3
Table 84. show qos dcb-map Field Descriptions
Field Description
State Complete: All mandatory DCB parameters are correctly configured. In
progress: The DCB map configuration is not complete. Some
mandatory parameters are not configured.
PFC Mode PFC configuration in the DCB map: On (enabled) or Off.
PG Priority group configured in the DCB map.
TSA Transmission scheduling algorithm used in the DCB map: Enhanced
Transmission Selection (ETS).
BW Percentage of bandwidth allocated to the priority group.
PFC PFC setting for the priority group: On (enabled) or Off.
Priorities 802.1p priorities configured in the priority group.
show npiv devices brief Command Example
Dell# show npiv devices brief
Total NPIV Devices = 2
--------------------------------------------------------------------------------
------------------------
ENode-Intf ENode-WWPN FCoE-Vlan Fabric-Intf Fabric-Map
LoginMethod Status
--------------------------------------------------------------------------------
1042
FC Flex IO Modules