Configuration manual
• show virtual links
• show ipv6 routes
Viewing Summary Information
To get general route, configuration, links status, and debug information, use the following commands.
• View the summary information of the IPv6 routes.
EXEC Privilege mode
show ipv6 route summary
• View the summary information for the OSPFv3 database.
EXEC Privilege mode
show ipv6 ospf database
• View the configuration of OSPFv3 neighbors.
EXEC Privilege mode
show ipv6 ospf neighbor
• View debug messages for all OSPFv3 interfaces.
EXEC Privilege mode
debug ipv6 ospf [event | packet] {type slot/port}
– event: View OSPF event messages.
– packet: View OSPF packets.
– For a Gigabit Ethernet interface, enter the keyword GigabitEthernet then the slot/port
information (for example, passive-interface gi 2/1).
– For a port channel, enter the keywords port-channel then a number from 1 to 255.
– For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port
information (for example, passive-interface ten 2/3).
– For a 40-Gigabit Ethernet interface, enter the keyword FortyGigabitEthernet then the slot/
port information.
– For a VLAN, enter the keyword vlan then a number from 1 to 4094 (for example, passive-
interface vlan 2222
). The system supports 4094 VLANs.
Open Shortest Path First (OSPFv2 and OSPFv3)
633