Configuration manual

interface GigabitEthernet 1/2

switchport

dot1x guest-vlan 200

dot1x auth-fail-vlan 100 max-attempts 5

no shutdown

Dell(conf-if-gi-1/2)#

View your configuration using the show config command from INTERFACE mode, as shown in the

example in Configuring a Guest VLAN or using the show dot1x interface command from EXEC

Privilege mode.

Dell(conf-if-gi-2/1)#dot1x port-control force-authorized

Dell(conf-if-gi-2/1)#do show dot1x interface gigabitethernet 2/1

802.1x information on Gi 2/1:

-----------------------------

Dot1x Status: Enable

Port Control: FORCE_AUTHORIZED

Port Auth Status: UNAUTHORIZED

Re-Authentication: Disable

Untagged VLAN id: None

Guest VLAN: Enable

Guest VLAN id: 200

Auth-Fail VLAN: Enable

Auth-Fail VLAN id: 100

Auth-Fail Max-Attempts: 5

Tx Period: 90 seconds

Quiet Period: 120 seconds

ReAuth Max: 10

Supplicant Timeout: 15 seconds

Server Timeout: 15 seconds

Re-Auth Interval: 7200 seconds

Max-EAP-Req: 10

Auth Type: SINGLE_HOST

Auth PAE State: Initialize

Backend State: Initialize

802.1X