Installation and Service Manual
Table Of Contents
- Dell EMC PowerEdge T350 Installation and Service Manual
- Contents
- About this document
- PowerEdge T350 system overview
- Initial system setup and configuration
- Minimum to POST and system management configuration validation
- Installing and removing system components
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- Optional front bezel
- System feet
- System cover
- Air shroud
- Intrusion switch module
- Drives
- Removing a drive blank
- Installing a drive blank
- Removing a drive carrier
- Installing the drive carrier
- Removing the drive from the drive carrier
- Installing the drive into the drive carrier
- Removing a 3.5-inch drive adapter from a 3.5-inch drive carrier
- Installing a 3.5-inch adapter into a 3.5-inch drive carrier
- Removing a 2.5-inch drive from the 3.5-inch drive adapter
- Installing a 2.5-inch drive into the 3.5-inch drive adapter
- Optional optical drive
- Drive backplane
- Cooling fans
- Cable routing
- System memory
- Processor and heat sink module
- Expansion cards
- Optional BOSS S2 module
- Optional IDSDM module
- MicroSD card
- Optional internal USB card
- Optional internal USB memory key
- Power supply unit
- Power interposer board
- System battery
- System board
- Trusted Platform Module
- Control panel
- Upgrade Kits
- Jumpers and connectors
- System diagnostics and indicator codes
- Getting help
- Documentation resources
Upgrade Kits
Upgrade kits for PowerEdge T350
The table lists the available After Point Of Sale [APOS] kits.
Table 22. Upgrade kits
Kits Related links to service instructions
Memory modules See Installing the memory module
SSDs See Installing the SSDs
Processors See Installing the processor
Heat sink See Installing the heat sink
Storage controller cards See Installing the expansion card into the expansion card riser
HBA/CNA (3rd party card)
Network cards
Power supplies See Installing the power supply units
Cables See Cable routing
Bezels See Installing the bezels
Expansion cards See Installing an expansion card riser
Power cords N/A
IDSDM See Installing an IDSDM
BOSS S2 See Installing an BOSS S2 module
Internal USB See Installing an internal USB
Topics:
• BOSS S2 module kit
• IDSDM kit
• Internal USB card kit
BOSS S2 module kit
The BOSS S2 module supports up to two M.2 SSDs.
Before you begin the installation or removal process, follow the safety guidelines and before working inside the system
instructions.
Table 23. BOSS S2 module kit components
T350 (quantity) Components in kit
NA BOSS cover
1 M3 x 0.05 x 4.5 mm screws
6
112 Upgrade Kits