Service Manual

Steps

1. Align the screw holes on the hard-drive bracket with the screw holes on the hard drive.

2. Replace the four screws (M3x3) that secure the hard-drive bracket to the hard drive.

3. Connect the interposer to the hard-drive assembly.

4. Align the screw holes on the hard-drive assembly with the screw holes on the palm-rest and keyboard assembly.

5. Replace the three screws (M2x3) that secure the hard-drive assembly to the palm-rest and keyboard assembly.

6. Connect the hard-drive cable to the system board and close the latch to secure the cable.

Next steps

1. Install the base cover.

2. Follow the procedure in After working inside your computer.

Left fan

Removing the left fan

Prerequisites

1. Follow the procedure in Before working inside your computer.

2. Remove the base cover.

About this task

The following image indicates the location of the left fan and provides a visual representation of the removal procedure.

Removing and installing components