Service Manual

Replacing the graphics-card fan

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in Before working inside your computer. After working inside your computer, follow the instructions in After

working inside your computer. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance.

Procedure

1. Slide the fan into the slots at an angle, on the system board.

2. Connect the fan cable to the system board.

3. Replace the three screws (M2x2.5) that secure the fan to the system board.

Post-requisites

Replace the base cover.

Replacing the graphics-card fan 57