Service Manual

Removing the palm rest
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1. Remove the base cover.
2. Remove the battery.
3. Remove the memory modules.
4. Remove the speakers.
5. Remove the solid-state drive/Intel Optane memory module.
6. Remove the wireless card.
7. Remove the graphics-card fan.
8. Remove the processor fan.
9. Remove the heat sink.
10. Remove the coin-cell battery.
11. Remove the touchpad.
12. Remove the hard drive (optional).
13. Remove the power-adapter port.
14. Remove the I/O board.
15. Remove the display assembly.
16. Remove the system board.
17. Remove the power button with fingerprint reader.
18. Remove the keyboard.
Procedure
After performing the above steps, we are left with the palm rest.
42
90 Removing the palm rest