Service Manual

Replacing the speakers

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in Before working inside your computer. After working inside your computer, follow the instructions in After

working inside your computer. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance.

Procedure

NOTE: If the rubber grommets are pushed out of the speakers when removing the speakers, push them back in place

before replacing the speakers.

1. Using the alignment posts and rubber grommets, place the speakers in the slots on the palm-rest assembly.

2. Route the speaker cable through the routing guides on the palm-rest assembly.

3. Connect the speaker cable to the system board.

Post-requisites

Replace the base cover.

40 Replacing the speakers