Service Manual

Removing the processor fan

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in Before working inside your computer. After working inside your computer, follow the instructions in After

working inside your computer. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance.

Prerequisites

Remove the base cover.

Procedure

1. Remove the three screws (M2x2.5) that secure the fan to the system board.

2. Lift the fan at an angle.

3. Disconnect the fan cable from the system board.

4. Lift the fan off the system board.

58 Removing the processor fan