Service Manual

Replacing the display assembly
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1. Route the display cable into the slot on the palm-rest assembly.
2. Align the tabs on the hinges with the slots on the palm-rest assembly and place the display assembly on the palm-rest assembly.
3. Replace the eight screws (M2x4) that secure the left and right hinges to the palm-rest assembly.
4. Align the hinge cover with the slots on the palm-rest assembly and press to secure the hinge cover.
35
72 Replacing the display assembly