White Papers

Configure server object on SC Series
31 Dell EMC SC Series: Microsoft Multipath I/O Best Practices | CML1004
13. Check the box to Enable multi-path. The option Add this connection… should already be selected.
14. Click Advanced.
15. Using the drop-down lists, do the following:
a. Set Local adapter to Microsoft iSCSI Initiator.
b. Select the Target portal IP address.
c. Select the matching Initiator IP (host server iSCSI IP) address. Make sure the target and initiator
IPs are in the same network or VLAN.
d. Click OK twice to return to the iSCSI Initiator properties window.
16. Repeat steps 12–15 to connect each additional target.