White Papers

Boot-from-SAN
46 Dell EMC SC Series: Microsoft Multipath I/O Best Practices | CML1004
6. Once the boot volume is mapped as LUN 0, view the Mappings tab to verify the presence of all
expected HBAs (two in this example) with a status of Up.
7. Using Fast!UTIL, go to Selectable Boot Settings for the first HBA and set Selectable Boot to
Enabled.
8. Arrow down to the first boot port and press Enter. One or more boot ports should be listed,
depending on how many front-end ports are configured on your SC Series array. Arrow down to the
first device until it is highlighted and press Enter.
9. The first boot port should now be populated with a WWN.