White Papers

Boot-from-SAN
49 Dell EMC SC Series: Microsoft Multipath I/O Best Practices | CML1004
18. On the SC Series array, change the Server Properties for the host from single path back to MPIO.
19. Launch the MPIO feature on the host, and under Discover Multi-Paths, select and install the
COMPELNTCompellent Vol item and reboot the host. It may be necessary to first perform a manual
disk rescan using Disk Management, or a reboot of the host.
20. After rebooting, verify that this MPIO device is listed under the MPIO Devices tab on the host.