Service Manual
Table Of Contents
- Precision 3260 Compact Service Manual
- Contents
- Working inside your computer
- Removing and installing components
- Recommended tools
- Screw list
- Major components of Precision 3260 Compact
- Side cover
- 2.5-inch hard drive
- Riser card
- Wireless card
- Speaker
- Processor fan
- Memory module
- M.2 solid-state drive
- Removing the M.2 2230 PCIe solid-state drive (slot-1)
- Installing the M.2 2230 PCIe solid-state drive (slot-1)
- Removing the M.2 2280 PCIe solid-state drive (slot-1)
- Installing the M.2 2280 PCIe solid-state drive (slot-1)
- Removing the M.2 2230 PCIe solid-state drive (slot-0)
- Installing the M.2 2230 PCIe solid-state drive (slot-0)
- Removing the M.2 2280 PCIe solid-state drive (slot-0)
- Installing the M.2 2280 PCIe solid-state drive (slot-0)
- Expansion card
- Optional I/O module
- Coin-cell battery
- Heat sink
- SATA FFC module
- Processor
- System board
- Internal antennae
- Drivers and downloads
- BIOS setup
- Troubleshooting
- Getting help and contacting Dell
Table 14. System setup options—System Management menu (continued)
System Management
By default, the option is disabled.
Table 15. System setup options—Keyboard menu
Keyboard
Numlock Enable Allows you to enable or disable the Numlock function when the system boots.
By default, the option Fn Lock Options is enabled.
Fn Lock Options By default, the Fn lock option is enabled.
Lock Mode By default, the Lock Mode Secondary option is enabled. With this option, the
F1-F2 keys scan the code for their secondary functions.
Table 16. System setup options—Pre-boot Behavior menu
Pre-boot Behavior
Adapter Warnings
Enable Adapter Warnings Enable or disable the warning messages during boot when the adapters with
less power capacity are detected.
By default, the option is enabled.
Warning and Errors Enable or disable the action to be done when a warning or error is encountered.
By default, the Prompt on Warnings and Errors option is enabled.
USB-C Warnings
Enable Dock Warning Messages
By default, the option is enabled.
Fastboot Allows you to configure the speed of the UEFI boot process.
By default, the Minimal option is enabled.
Extend BIOS POST Time Set the BIOS POST load time.
By default, the 0 seconds option is enabled.
Table 17. System setup options—Virtualization menu
Virtualization
Intel Virtualization Technology
Enable Intel Virtualization Technology
(VT)
When enabled, the system will be able to run a Virtual Machine Monitor
(VMM).
By default, the option is enabled.
VT for Direct I/O When enabled, the system will be able to perform Virtualization Technology for
Direct I/O (VT-d).
By default, the option is enabled.
Intel Trusted Execution Technology
(TXT)
Enable Intel Trusted Execution
Technology (TXT)
Specifies whether a measured Virtual Machine Monitor (MVMM) can use the
additional hardware capabilities that are provided by Intel Trusted Execution
Technology. The following must be enabled in order to enable Intel TXT.
● Trusted Platform Module (TPM)
● Intel Hyper-Threading
● All CPU cores (Multi-Core Support)
● Intel Virtualization Technology
82 BIOS setup