User`s guide



8. Attach the serial ATA connector removed in step5 to the first hard drive.



9. Locate an unused serial ATA connector on the system board and attach a drive cable to this connector and to the second hard drive.



10. Replace the computer cover.



Drive-Panel Inserts

If you are installing a new floppy or CD/DVD drive instead of replacing a drive, remove the drive-panel inserts.



1. Follow the procedures in "Before You Begin."



2. Remove the drive panel by sliding the drive release latch downward to open the panel. Then remove it from the hinges.

hard-drive cable

hard-drive cable on system board

power cable