User Manual

Table Of Contents
NOTE: Step 3b is required only if the PCIe SSD card is removed.
c. Disconnect the keyboard cables [4, 5].
4. To remove the dock frame:
a. Remove the screw and lift the metal bracket [1,2].
b. Disconnect the eDP cable [3].
c. Remove the screws that secure the dock frame to the computer [4].
d. Lift the dock frame from the computer [5].
Installing the dock frame
1. Place the dock frame on the computer and tighten the screws.
2. Connect the eDP cable.
3. Place the metal bracket and tighten the screw.
4. Connect the keyboard cable.
5. Place the SSD plate and tighten the screw to secure it.
NOTE: Step 5 is required only if the PCIe SSD card is removed.
6. Tighten the screws to secure the dock frame to the computer.
7. Install the:
a. WWAN card
b. WLAN card
c. hard drive assembly or M.2 SSD or PCIe SSD
d. battery
e. base cover
8. Follow the procedure in After working inside your system.
18