User Manual

Table Of Contents
Removing the touchpad button
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. base cover
b. battery
c. dock frame
3. To remove the touchpad button:
a. Lift the latch and disconnect the touchpad button cable from the connector [1] [2].
b. Remove the screws that secure the touchpad button [3].
c. Lift and remove the touchpad button away from the computer [4].
Installing the touchpad button
1. Place the touchpad button into the slot on the system board.
2. Tighten the screws to secure the touchpad button to the system board.
3. Connect the touchpad button cable to the connector on the system board.
4. Install the:
a. dock frame
b. battery
c. base cover
5. Follow the procedure in After working inside your computer.
Removing the power connector port
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. base cover
b. battery
c. dock frame
3. To remove the power connector port:
a. Remove the screws to release the metal bracket on the power connector port [1].
19