User Manual

Table Of Contents
NOTE: The number of keyboard cables may dier based on the computer conguration.
4. To remove the keyboard:
a. Using a plastic scribe, lift the keyboard trim from the edges to release it from the keyboard [1, 2, 3].
b. Remove the screws that secure the keyboard to the computer [4].
NOTE: To avoid damage to the keyboard, gently remove the keyboard from the computer.
c. Lift the keyboard from computer [5].
Installing the keyboard
1. Align the keyboard with the screw holders on the computer.
2. Tighten the screws to secure the keyboard to the computer.
3. Align the keyboard trim with the tabs on the computer and press it until it clicks into place
4. Connect the keyboard cables to the connectors on the system board.
NOTE: If you have removed the dock frame, then install the dock frame and then connect the keyboard cables.
5. Install the:
a. battery
b. base cover
6. Follow the procedure in After working inside your system.
21