User Manual

Table Of Contents
Installing the speakers
1. Place the speakers into the slots on the computer.
2. Route the speaker cable through the retention clips through the routing channel.
3. Connect the speaker cable to the connector on the system board.
4. Install the:
a. dock frame
b. WLAN
c. WWAN
d. hard drive assembly or M.2 SSD or PCIe SSD
e. battery
f. base cover
5. Follow the procedure in After working inside your computer.
Removing the system board
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. SIM card
b. base cover
c. battery
d. memory
e. hard drive assembly or M.2 SSD or PCIe SSD
f. keyboard
g. WLAN
h. WWAN
i. dock frame
j. heat sink assembly
k. power connector port
3. Remove the SIM card tray from the computer.
4. To remove the system board:
a. Lift the latch and disconnect the speaker cable, touch pad and system board cable from the computer [1, 2, 3].
b. Disconnect the power connector port cable from the system board [4].
c. Remove the screws that secures system board to the computer [5].
d. Lift the system board from the computer [6].
28