User Manual
Table Of Contents
- Dell Latitude E5470 Owner's Manual
- Working on your computer
- Removing and installing components
- Recommended tools
- Installing the Subscriber Identification Module (SIM) card
- Removing the Subscriber Identification Module (SIM) card
- Removing the base cover
- Installing the base cover
- Removing the battery
- Installing the battery
- Removing the hard drive assembly
- Removing the hard drive from the hard drive bracket
- Installing the hard drive into the hard drive bracket
- Installing the hard drive assembly
- Installing the optional M.2 SSD
- Removing the optional M.2 Solid State Drive (SSD)
- Installing the optional PCIe SSD
- Removing the optional PCIe SSD
- Removing the memory module
- Installing the memory module
- Removing the WLAN card
- Installing the WLAN card
- Removing the WWAN card
- Installing the WWAN card
- Removing the dock frame
- Installing the dock frame
- Removing the touchpad button
- Installing the touchpad button
- Removing the power connector port
- Installing the power connector port
- Removing the keyboard
- Installing the keyboard
- Removing the display assembly
- Installing the display assembly
- Removing the optional SmartCard reader board
- Installing the optional SmartCard reader board
- Removing the optional finger print reader board
- Installing the optional finger print reader board
- Removing the LED board
- Installing the LED board
- Removing the heat sink assembly
- Installing the heat sink assembly
- Removing the speakers
- Installing the speakers
- Removing the system board
- Installing the system board
- Removing the coin cell battery
- Installing the coin cell battery
- Removing the palmrest
- Installing the palmrest
- System setup options
- Boot Sequence
- Navigation keys
- System Setup overview
- Accessing System Setup
- General screen options
- System Configuration screen options
- Video screen options
- Security screen options
- Secure Boot screen options
- Intel Software Guard Extensions screen options
- Performance screen options
- Power Management screen options
- POST Behavior screen options
- Virtualization support screen options
- Wireless screen options
- Maintenance screen options
- System Log screen options
- Updating the BIOS in Windows
- System and setup password
- Technical specifications
- System specifications
- Processor specifications
- Memory specifications
- Storage specifications
- Audio specifications
- Video specifications
- Camera specifications
- Communication specifications
- Port and connector specifications
- Contactless smart card specifications
- Display specifications
- Keyboard specifications
- Touchpad specifications
- Battery specifications
- AC Adapter specifications
- Physical specifications
- Environmental specifications
- Diagnostics
- Contacting Dell
Installing the system board
1. Align the system board with the screw holders on the computer.
2. Tighten the screws to secure the system board to the computer.
3. Connect the speaker cable to the connector on the system and route the cable through the routing channels.
4. Connect the power connector and coin cell battery cables to the connectors on the system board:
5. Install the:
a. power connector port
b. dock frame
c. WLAN
d. heat sink assembly
e. WWAN
f. hard drive assembly or M.2 SSD or PCIe SSD
g. keyboard
h. memory module
i. battery
j. base cover
k. SIM card
6. Follow the procedure in After working inside your computer.
Removing the coin cell battery
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. base cover
b. battery
c. hard drive assemblyor M.2 SSD or PCIe SSD
d. dock frame
e. memory
f. hard drive assembly or M.2 SSD or PCIe SSD
g. keyboard
h. WLAN
i. WWAN
j. dock frame
k. heat sink assembly
l. power connector port
3. To remove the coin cell battery:
a. Disconnect the coin cell battery cable from the connector on the system board [1].
29