User Manual

Table Of Contents
j. heat sink assembly
k. power connector port
l. system board
3. The palmrest is the remaining component, after removing all the components.
Installing the palmrest
1. Align the palmrest on the computer.
2. Install the:
a. system board
b. power connector port
c. dock frame
d. WLAN
e. heat sink assembly
f. WWAN
g. hard drive assembly or M.2 SSD or PCIe SSD
h. keyboard
i. memory module
j. battery
k. base cover
l. SIM card
3. Follow the procedure in After working inside your computer.
31