User Manual

Table Of Contents
3
System setup options
NOTE: Depending on the computer and its installed devices, the items listed in this section may or may not appear.
Boot Sequence
Boot Sequence allows you to bypass the System Setup–dened boot device order and boot directly to a specic device (for
example: optical drive or hard drive). During the Power-on Self Test (POST), when the Dell logo appears. you can:
Access System Setup by pressing F2 key
Bring up the one-time boot menu by pressing F12 key
The one-time boot menu displays the devices that you can boot from including the diagnostic option. The boot menu options are:
Removable Drive (if available)
STXXXX Drive
NOTE: XXX denotes the SATA drive number.
Optical Drive (if available)
Diagnostics
NOTE: Choosing Diagnostics, will display the ePSA diagnostics screen.
The boot sequence screen also displays the option to access the System Setup screen.
Navigation keys
NOTE: For most of the System Setup options, changes that you make are recorded but do not take eect until you
restart the system.
Keys
Navigation
Up arrow Moves to the previous eld.
Down arrow Moves to the next eld.
Enter Selects a value in the selected eld (if applicable) or follow the link in the eld.
Spacebar Expands or collapses a dropdown list, if applicable.
Tab Moves to the next focus area.
NOTE: For the standard graphics browser only.
Esc Moves to the previous page until you view the main screen. Pressing Esc in the main screen displays a
message that prompts you to save any unsaved changes and restarts the system.
System Setup overview
System Setup allows you to:
32