User Manual

Table Of Contents
System Conguration screen options
Option Description
Integrated NIC Allows you to congure the integrated network controller. The options are:
Disabled
Enabled
Enabled w/PXE: This option is enabled by default.
Parallel Port Allows you to congure the parallel port on the docking station. The options are:
Disabled
AT: This option is enabled by default.
PS2
ECP
Serial Port Allows you to congure the integrated serial port. The options are:
Disabled
COM1: This option is enabled by default.
COM2
COM3
COM4
SATA Operation Allows you to congure the internal SATA hard-drive controller. The options are:
Disabled
AHCI
RAID On: This option is enabled by default.
Drives Allows you to congure the SATA drives on board. All drives are enabled by default. The options are:
SATA-0
SATA-1
SATA-2
M.2 PCIe SSD-0
SMART Reporting This eld controls whether hard drive errors for integrated drives are reported during system startup. This
technology is part of the SMART (Self Monitoring Analysis and Reporting Technology) specication. This
option is disabled by default.
Enable SMART Reporting
USB Conguration This eld congures the integrated USB controller. If Boot Support is enabled, the system is allowed to boot
any type of USB Mass Storage Devices (HDD, memory key, oppy).
If USB port is enabled, device attached to this port is enabled and available for OS.
If USB port is disabled, the OS cannot see any device attached to this port.
34