Users Guide

Operator Panel 123
Changing the Language
You can change the language used on the touch panel.
When Using the Operator Panel
1 Press the (Information) button.
2 Ta p t h e Tools tab, and then tap Language Settings .
3 Ta p Panel Language .
4 Tap until the desired language appears, and then tap the desired language.
5 Ta p OK .
When Using the Tool Box
1 Click Start  All Programs  Dell Printers  Dell Printer Hub or Dell Printer Management Tool .
For Windows
®
10: Click the Start button  Dell Printer Hub or Dell Printer Management Tool .
2 For Dell Printer Hub, select the printer from My Printers on the home screen.
For Dell Printer Management Tool, select the printer displayed by default, or another printer from the drop-down
list on the upper-right corner of the home screen.
3 Click the shortcut to the Tool Box on the left of the screen.
The
Tool Box opens.
4 Click the Printer Maintenance tab.
5 Select Panel Language from the list at the left side of the page.
The
Panel Language page appears.
6 Select the desired language from Panel Language , and then click Apply New Settings .
Setting the Power Saver Timer Option
You can set the power saver timer for the printer. The printer enters the power saver mode when the printer is not
used for a certain period of time.
NOTE: If Panel Lock Control is set to Enable , you need to enter the four-digit password to enter the Admin
Settings
menu.
To set the power saver timer:
1
Press the (Information) button.
2 Ta p t h e Tools tab, and then tap Admin Settings .
3 Ta p System Settings .
4 Ta p General .
5 Ta p Power Saver Timer .
6 Ta p Sleep or Deep Sleep .
7 Tap – or +, or use the number pad to enter the desired value.
You can specify from 1 to 60 minutes for
Sleep or 1 to 60 minutes for Deep Sleep .
8 Ta p OK .